 | |  | |  | |  | |  | |  |
Pictured with 6 shot 45 ACP
full Moon Clip
full Moon Clip
Pictured with 5 shot 9mm
Full Moon Clip
Full Moon Clip
Opened for clip removal
Constructed with a hard molded spine, the
pouch is locked into position on the belt
eliminating shifting or movement.
The loaded moon clip then drops over the
center post and is secured with the leather
snap. Removal for loading is even quicker.
pouch is locked into position on the belt
eliminating shifting or movement.
The loaded moon clip then drops over the
center post and is secured with the leather
snap. Removal for loading is even quicker.
Model: Moon Pocket
Price: $39.00
The Moon Pocket carrier allows you to carry
fully loaded Moon Clips, concealed, on your
belt and readily accessible for quick reloads.
Carries so flat you can conceal it with a T shirt.
The hard spine construction locks the carrier
solidly behind the belt eliminating shifting or
tilting of the pouch, even when unsnapped for
ammo retrieval.
Quick access and discrete carry. The perfect
accessory for moon clip equipped revolvers.
Price: $39.00
The Moon Pocket carrier allows you to carry
fully loaded Moon Clips, concealed, on your
belt and readily accessible for quick reloads.
Carries so flat you can conceal it with a T shirt.
The hard spine construction locks the carrier
solidly behind the belt eliminating shifting or
tilting of the pouch, even when unsnapped for
ammo retrieval.
Quick access and discrete carry. The perfect
accessory for moon clip equipped revolvers.
Shown opened
Speed Strip Holders
Model: SSH-1
Price: $39.00
Colors: Available in any of our holster colors
Slips under the belt for very low profile concealment.
Available for use with
9mm, .38/.357 or .44 caliber Speed Strips
Model: SSH-1
Price: $39.00
Colors: Available in any of our holster colors
Slips under the belt for very low profile concealment.
Available for use with
9mm, .38/.357 or .44 caliber Speed Strips
Magazine Holsters
Model M-1H is a high ride, belt slide mag holster
Price $39.00
Colors Available in any of our holster colors
Note how this model rides high on the belt to aide in
concealment.
State gun model, caliber and single or double stack
when ordering.
These are made for 1.5 inch wide gun belts and fit very
snug. If a different belt width is needed, please specify.
Tooling will be done at no extra charge if ordering a holster or
belt at the same time.
Model M-1H is a high ride, belt slide mag holster
Price $39.00
Colors Available in any of our holster colors
Note how this model rides high on the belt to aide in
concealment.
State gun model, caliber and single or double stack
when ordering.
These are made for 1.5 inch wide gun belts and fit very
snug. If a different belt width is needed, please specify.
Tooling will be done at no extra charge if ordering a holster or
belt at the same time.
Model: M-1C is a quick clip model that
features a steel spring clip for positive
retention yet allows the holster to be
removed without removing the belt.
( No plastic clips here; I've seen them break ).
Tooling will be done at no extra charge if
ordering a holster or belt at the same time.
Price: $39.00
Colors: Available in any of our holster
colors.
features a steel spring clip for positive
retention yet allows the holster to be
removed without removing the belt.
( No plastic clips here; I've seen them break ).
Tooling will be done at no extra charge if
ordering a holster or belt at the same time.
Price: $39.00
Colors: Available in any of our holster
colors.
M1-C available with
Cobra tooling when
ordering a matching
holster.
Cobra tooling when
ordering a matching
holster.
Double Mag Pouch
Model: M-2 is a belt slide, double pouch. It can be
made "straight up" or with forward or rearward
cant as desired. Tension adjustable with all
stainless steel hardware.
Price: $55.00
Colors: Available in any of our holster colors.
Tooling will be done at no extra charge if ordering a
holster at the same time.
State gun model, caliber and single or double
stack when ordering.
Model: M-2 is a belt slide, double pouch. It can be
made "straight up" or with forward or rearward
cant as desired. Tension adjustable with all
stainless steel hardware.
Price: $55.00
Colors: Available in any of our holster colors.
Tooling will be done at no extra charge if ordering a
holster at the same time.
State gun model, caliber and single or double
stack when ordering.
Double Mag Pouch
Model: QS-M2 Same tension adjustment but
with Quick Snap feature to allow easy on / off
like the QS-LA holster series.
Price: $65.00
Colors: Available in any of our holster colors.
Tooling will be done at no extra charge if
ordering a holster at the same time.
Only available for Single Stack
magazines.
Model: QS-M2 Same tension adjustment but
with Quick Snap feature to allow easy on / off
like the QS-LA holster series.
Price: $65.00
Colors: Available in any of our holster colors.
Tooling will be done at no extra charge if
ordering a holster at the same time.
Only available for Single Stack
magazines.
Pocket Mag Pouch
Model: M1P
Price: $ 35.00
Colors: Saddle oil tan
The Pocket Magazine Pouch is designed to
carry a single spare magazine in an upright
position, inside the pants pocket. The back
side of the pouch is "ruff side out" leather to
aide in keeping it firmly in place when you
withdraw the magazine and it is contoured to
the shape of the body to reduce printing in the
pocket. A mag pouch is essential to keeping
a magazine clean and free from pocket lint
and debris that could cause a jam.
Model: M1P
Price: $ 35.00
Colors: Saddle oil tan
The Pocket Magazine Pouch is designed to
carry a single spare magazine in an upright
position, inside the pants pocket. The back
side of the pouch is "ruff side out" leather to
aide in keeping it firmly in place when you
withdraw the magazine and it is contoured to
the shape of the body to reduce printing in the
pocket. A mag pouch is essential to keeping
a magazine clean and free from pocket lint
and debris that could cause a jam.
Back side is "Ruff out" leather.
Light Holster
Model: LH-C
Type: Belt Clip
Price: $39.00
Colors Available in any of our holster colors
Tactical lights have become a valuable tool for
self defense but if you don't have it on you
when you need it............
This clip on holster makes it easy to
have your light with you when you need it.
Fits one inch diameter lights.
Model: LH-C
Type: Belt Clip
Price: $39.00
Colors Available in any of our holster colors
Tactical lights have become a valuable tool for
self defense but if you don't have it on you
when you need it............
This clip on holster makes it easy to
have your light with you when you need it.
Fits one inch diameter lights.
| Care and Maintenance of your Holster. Your holster will require very little in the way of maintenance. Keep it clean and dry. Do NOT oil it. If it should become excessively dirty, use a slightly damp rag to clean it and then let it air dry. ( No heat ). As it ages, you will see normal wear and scuffing occur. You can apply Fiebing's Leather Balm occasionally to restore that like new shine and give it a wax protection. One 4 oz. bottle will last a long, long time. Price: $ 8.00 Free shipping when included with holster order. $ 8.00 shipping if ordered alone. |
 | |  | |  | |  |
Double Speed Strip Holder
Model: SSH-2
Price: $49.00
Colors: Available in any of our holster colors
The second strip remains in holder until you
thumb the secondary retention strap. It then
drops into your hand the same way the first one
did.
Available for use with
9mm, .38/.357 or .44 caliber speed strips
Model: SSH-2
Price: $49.00
Colors: Available in any of our holster colors
The second strip remains in holder until you
thumb the secondary retention strap. It then
drops into your hand the same way the first one
did.
Available for use with
9mm, .38/.357 or .44 caliber speed strips
Handcuff Case
Model: HC-1
Type: Belt clip / Pull through retention
Price: $49.00
Colors: Available in any of our holster
colors.
This cuff case offers one handed, pull
through deployment for quick and easy
access. The strong steel belt clip makes
it easy to attach or remove from the belt
but a leather belt loop can be substituted if
desired.
Model: HC-1
Type: Belt clip / Pull through retention
Price: $49.00
Colors: Available in any of our holster
colors.
This cuff case offers one handed, pull
through deployment for quick and easy
access. The strong steel belt clip makes
it easy to attach or remove from the belt
but a leather belt loop can be substituted if
desired.
Pocket Holster
Model: PH
Price: $ 45.00
Color: Saddle Oil Tan
The Pocket Holster is for those times when you
can't reasonably conceal your weapon in a
good belt holster. Made for Pocket size pistols
up to the size of a Glock 43 or Sig P365.
Leather is rough side out to help it stay in the
pocket when the pistol is withdrawn, and is
treated with an acrylic finish to resist moisture.
Hard molded to retain it's shape, the pocket
holster keeps lint and debris out of the barrel
and action helping insure pistol function and
maintaining proper, grip up position.
Model: PH
Price: $ 45.00
Color: Saddle Oil Tan
The Pocket Holster is for those times when you
can't reasonably conceal your weapon in a
good belt holster. Made for Pocket size pistols
up to the size of a Glock 43 or Sig P365.
Leather is rough side out to help it stay in the
pocket when the pistol is withdrawn, and is
treated with an acrylic finish to resist moisture.
Hard molded to retain it's shape, the pocket
holster keeps lint and debris out of the barrel
and action helping insure pistol function and
maintaining proper, grip up position.
